This tutorial has been requested for quite a long time but I waited so long because I was not too keen on the many install methods shown out there. Free McBoot is Free Memory Card Boot, a PlayStation 2 softmod allowing you to run unsigned code and unofficial programs. If one of your game discs is scratched, no problem – use OpenPS2Loader to boot games from USB, SMB (network) or HDD – with per-game options.

Requirements:

PS2 with a HDD connected to the Network Adapter
Retail HDL/HDA disc
PS2 Memory Card
USB device – formatted to FAT32

On the PC:

1 – Download the uLaunchELF ISO and extract the ISO file to your desktop. Download Winhiip if you dont have it already and use Winhiip (or whatever other way you know to do) to install the ISO to the HDD connected to your PC. Heres a Winhiip Guide if your not sure how to use Winhiip.

2 – Download the Noobie Package and extract the INSTALL folder and the FREE_MCBOOT.ELF to your USB device’s ROOT (means not inside any folder). You can look at the Noobie Guide by clicking the User Guide tab above, if you need more info.

On the PS2:

Insert the HDD, the USB device, the HDL or HDA disc and a PS2 memory Card into the console and turn it on.
Run the uLaunchELF program from the Games List ( you may need to set Mode3 if you get a blackscreen)
From the uLaunchELF screen (ignore the LAUNCHELF.CNF error message) press the O button to go into the FileBrowser menu
Select the mass: option, as thats your USB device
From the next screen, select the FREE_MCBOOT.ELF and press O button to execute it.

You should now be looking at the FMCB installer screen, so refer to the User Guides for install options.

WINHIIP GUIDE – http://sksapps.com/winhiip_tutorial.html

NOOBIE PACKAGE –http://www.filecrop.com/69203424/index.html

U LAUNCH ELF.ISO- http://rapidshare.com/files/145123426/uLaunchELF_v4.28_CD_ISO.zip

This guide will help you to install FreeHDBoot on your PlayStation 2, which will ‘soft mod‘ your console. To follow this guide you must meet the following requirements.

Install Free Mcboot From Usb

You must have:

A Windows PC (XP to Windows 10).
An original ‘fat’ PlayStation 2.
An official PS2 Network Adapter.
IDE Hard Drive (SATA incompatible without modification of the adapter, make a note of the model and storage size).
IDE-to-USB, or another way to connect your IDE HDD to your computer.
A large flat-head screwdriver, or a large coin.

You also need the following software (all free):

WinHIIP 1.7.6.
HDD Raw Copy 1.02 or above.
Image of ‘FreeHDBoot‘.

The FreeHDBoot image was not generated by us, therefore cannot guarantee success with it.

A slim console and beyond is not compatible with this mod, since the network adapter for the fat PS2 has an IDE drive connector, a feature absent from the remodels as the Ethernet connection was built-in. You will notice through this guide that this IDE drive support is why the original PS2 was so much larger than the slim.

Installation Steps

Ensure you can connect your IDE drive to your computer, either through a USB converter or by using a ATA connection in your computer (and maybe consider buying a new one). I would also recommend extracting the three tools above into one directory, just so you know where they are. The two programs needed are portable (if you downloaded the portable copy of HDDRC), so no installation will be needed.

Connect drive and open WinHIIP

Open the folder where you extracted WinHIIP and find WinHIIP.exe. Right click and run this as Administrator (Vista and above). When you open the WinHIIP software you will be given a screen similar to above. Most of the controls here are greyed out because they need to know which drive you wish to use before you continue. The drive you select will need to be your IDE drive you wish to dedicate for your PlayStation.

Be careful in choosing your drive to use with the software. If you select a drive that is not your PS2 dedicated drive, you could lose your data. Retro PlayStation is not responsible for any data lost following this guide.

Select the drive you wish to use with your PS2. However, you need a particular drive format before you can continue with the installation. You need your drive to be formatted as ‘PS2’ format, which your base PC system cannot achieve but WinHIIP can.

Once your drive has been selected (if you are unsure, open ‘Computer Management’ and check ‘Disk Management’, it will say which drive number is what). You will be greeted with the following dialog.

All this means is that you have selected a normal hard drive, when the system wants a PS2 formatted drive. This enables the button at the bottom ‘Format Drive’. Click it and you will be greeted with this.

Unless you have advanced knowledge with Linux drives and HDLoader, you do not need to touch all these left-side options. All you need to worry about are the options on the right.

Erase Mode

Tells the drive whether is simply wipes the drive by telling the hard drive firmware ‘it’s wiped’, so the firmware ignores all the data on the drive prior and writes new stuff to the drive, or set it to Full if you want it to write blank data to the whole drive, useful only if you have something to hide previously on the drive, or quick and partial failed in the past.

Application

This is important – you want either HDLoader 24bit or 48bit. In almost all cases, I would recommend 48bit if the option is available. 24bit does not support all drive sizes, whereas 48bit has large drive support built in to it. ToxicOS is an advanced feature and is not used in this tutorial.

Once you’re happy with your options and you’re 100% sure the drive is the correct one, you can format it. This process takes a while, so best time to have a cup of tea or coffee if you are so inclined.

Once this process has finished, you should see a screen similar to this. If so, congratulations! Your drive is now PS2-ready – But we’re not finished yet!

Installing FreeHDBoot via HDD Raw Copy Magic

Now we have a drive that is PS2-formatted and ready to go, we need to give it the FreeHDBoot software.

For this you will need to know the size and model of your drive, so that you can identify which one is your IDE drive. Your drive will always have a ‘BUS’ of ‘ATA’, and the model will reflect what was on the top of the hard drive. For our guide our drive is called VMWare Virtual IDE Hard Drive.

Here we are selecting the source, which is what we will be copying to the drive. We aren’t cloning a physical disk but rather a copy you downloaded earlier, so double click on the FILE option.

Select the image file downloaded earlier (in the folder you extracted, ending with .imgc). This should add an extra option to the list, a drive you will likely be unfamiliar with.

How To Install Free Mcboot On Hdd File

Select this unfamiliar drive (will still be called FILE under BUS), and click continue.

We are now selecting the target drive, which will be our magical PS2 drive we created earlier. Select it from the list, and click continue once more. This will take us to the final stage.

Confirm you are happy with all the selections, and then click START. This is another long process, so nobody will blame you if you enjoy another cup of your favourite beverage. Once the process has finished, your drive will be PS2 formatted with a copy of FreeHDBoot loaded up to it, ready to go!

The PlayStation 2, Modded not standard

Should you follow all the instructions carefully and your drive survived the ordeal, you should now have a ready-to-go exploited softmod hard drive! All we need to do is connect the drive to the PS2.

Safely disconnect your hard drive from your computer by clicking the picture of USB male end and a green tick in the system tray and ejecting the drive. Once you can remove it, take it out of whatever you are connecting it with and grab the PS2 network adapter. You will notice the side of the network adapter that faces the PS2 has two connections, these should match up with the pins on your hard drive. Simply push the pins into the connector, and then slide the hard drive into the cavity in the PS2 until you feel it connect. Once you’ve pushed it as far as it will go, screw the adapter in to place,